Download Multicon User Manual

Software Upgrade
60
11.3.2 Using Multicon Web Interface
It is possible to upgrade using the Multicon Web interface.
1. Access the CONFIG tab, subsection “Firmware upgrade”.
2. Select the firmware upgrade file by pressing “Choose” or “Browse” (depending on your
web browser), then press “Upgrade”.
Figure 11.2
Multicon web upgrade
1. The upgrade process will then upload and install the firmware upgrade, this will take a
few minutes.
2. Multicon must be restarted after the process is completed.
ID: man-multicon
Multicon Manual Rev. L