Download Multicon User Manual
Transcript
Web Interface 31 − Lost communication to a subsystem (Flashlink cards, Sublime/Modular routers) − Lost communication to other Multicons in the system Alarm severities that are used: • Critical - Will affect operation and control, take action immediately • Major - Major problem, but will not affect operation and control immediately • Minor - Minor problem, should be investigated • Warning - Warning about change in a module, should be investigated • Info - Used only for information Note: Alarms from Flashlink cards does not support severity and are set to “Warning” as default. 7.3 Log Page The log page shows log entries for the entire Multicon system, i.e. all Multicon controllers will update other controllers with the latest log entries. The Web interface shows the latest 4000 log entries since last restart of the controller. The following information is displayed per log entry: • Time – Timestamp when the log entry was first recorded • Source – The Multicon controller that initiated the log entry, N/A if user initiated like crosspoint setting from control panel. • Severity – May be either “Info” for information entries (normal event) or “Warning” for warning entries (problem event). • Text – Textual description of the log entry. • User – The user that performed the action that initiated the log entry, N/A if action was initiated by Multicon controller. The log may also be retrieved in CSV format either using HTTP or FTP from the Multicon controller. The log in CSV format contains the same information that is available from the Web interface. HTTP URL for retrieval of CSV formatted log: http://<MulticonIPAddress>/conf/logs/mc How-to retrieve CSV formatted log via FTP: ftp <MulticonIPAddress> cd /cf/logs get mc quit ID: man-multicon Multicon Manual Rev. L