Download The Dark Side

setenv
setenv
setenv
setenv
setenv
setenv
setenv
setenv
setenv
setenv
setenv
ESP_HIPRI_4 804 ;* mdrint,tcs_console
ESP_HIPRI_3 803 ;* audioman
ESP_HIPRI_2 802 ;* consoled
ESP_HIPRI_0 800 ;* mdrwfld
ESP_MAXAGE 800
ESP_PRI_10 138 ;* gfxdisp,gfxwm,gfxglob,
ESP_PRI_8 134 ;* mdrwsmain,mdrwsplay,mdrwfld,mdrscitask
ESP_PRI_6 133 ;*
ESP_PRI_4 132 ;* GFX modules
ESP_PRI_2 130
ESP_PRI_0 128
chx /dd/usr/cmds/mfx
* Ensure not already running...
mfxalready
load echo
load mdrstart
* Print Banner
echo -nz=/dd/usr/sys/mfx_copyright
*
* Display sign-on message in gfx status line.
sysmesg "Starting MFX"
*
echo Checking Console Software Revision
mfxload -sv >>>/tvt
*
echo "Starting QServer"
sysmesg "Starting QSYS"
qserver -q=atv </nil >>>/tvt
*
echo "Starting TCS Console Task"
sysmesg "Starting TCS Console Task"
(tcs_console -z </nil >>>/tvt &)<>>>/nil
*
echo "Starting TCS"
sysmesg "Starting TCS"
tcs_start /dd/usr/qsys/tcs/tcsmain </nil
*
echo Starting AMAN: $(PRODUCT_CONFIG)
mdrstart 45 audioman -tkl </nil
*
echo Starting MDR MAIN
** Try These for Fast Editing/Undo/Redo (well it was faster for mfx3!)
**
***setenv UNDO_DEPTH 7
***setenv UNDO_DEVICE /r1
*
** Normal Settings for UNDO/REDO
*
setenv UNDO_DEPTH 64
setenv UNDO_DEVICE /dd/TMP
*
setenv NO_PT_MACBIN 1
54