Download A8N-VM specifications summary

9.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
A8N-VM
The serial port bracket (COM1) is purchased separately.
COM1
PIN 1
®
A8N-VM COM port connector
1 0 . Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module
that supports either High Definition Audio or AC `97 audio standard.
Connect one end of the front panel audio I/O module cable to this
connector.
NC
AGND
NC
NC
Legacy AC’97-compliant
pin definition
MIC2_L
MIC2_R
Line out_R
NC
Line out_L
AAFP
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
®
SENSE2_RETUR
A8N-VM
GND
PRESENCE#
SENSE1_RETUR
Azalia-compliant
pin definition
A8N-VM Analog front panel connector
1-26
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard high-definition
audio capability.
•
If you want to connect a high-definition front panel audio module to
this connector, make sure that the Onboard AUDIO item in the BIOS
is set to [Enabled]. See page 2-27 for details.
Chapter 1: Product introduction