Download acopos1

Transcript
Wiring • General Information
1.1.2 Installation Notes
•
•
The switching cabinet or the system must be constructed appropriately.
In order to avoid disturbances,
-
motor cables
encoder cables
control cables
data cables
are to be properly shielded.
•
Inductive switching elements such as contactors or relays are to be equipped with
corresponding suppressor elements such as varistors, RC elements or damping diodes.
•
All electrical connections are to be kept as short as possible.
•
Cable shields are to be attached to the designated shield terminals and the plug housing.
•
Shielded cables with copper mesh or tinned copper mesh are to be used. Twisting or
extending the protective mesh using single conductors is not allowed.
•
Unused cable conductors are to be grounded on both sides if possible.
104
ACOPOS User's Manual (V1)