Download Local PDF

Define a TREND Component
Chapter 13 Page 175
Attribute
Description
StopTrigger
Operation2
Specify the operation that is applied on StopTriggerTag2 and StopTriggerTargetValue2 or
StopTriggerTargetTag2.
Enter
For
0
Exact Equal (Tag EQU Target)
1
Trigger Level Equal (Tag = Target)
2
Not Equal (Tag != Target)
3
Less Than (Tag < Target)
4
Greater Than (Tag > Target)
5
Less Than or Equal To (Tag <= Target)
6
Greater Than or Equal To (Tag >= Target)
7
Positive Slope (slope of Tag is positive)
8
Negative Slope (slope of Tag is negative)
9
Bitwise OR ((Tag OR Target) = 0)
10
Bitwise OR ((Tag OR Target) != 0)
11
Bitwise AND ((Tag AND Target) = 0)
12
Bitwise AND ((Tag AND Target) != 0)
13
Bitwise XOR ((Tag XOR Target) = 0)
14
Bitwise XOR ((Tag XOR Target) != 0)
Specify StopTriggerOperation2 := number
StopTriggerTarget
Type2
Specify the type of the second stop trigger target. Enter TargetValue or TargetTag. If you
specify TargetValue, StopTriggerTargetValue2 is expected. Otherwise,
StopTriggerTargetTag2 is expected.
Specify StopTriggerTargetType2 := text
StopTriggerTarget
Value2
Specify a target value if the StopTriggerTargetType2 is TargetValue. Enter a binary, octal,
decimal, or hexadecimal integer number or enter a floating point number.
Specify StopTriggerTargetValue2 := number
StopTriggerTarget
Tag2
Specify a target tag if the StopTriggerTargetType is TargetTag. The name must be one of
the pen names.
Specify StopTriggerTargetTag2 := text
PostSampleType
Define how post-samples are specified. Enter Samples or TimePeriod.
Specify PostSampleType := text
PostSamples
Specify the number of post-samples (0...1000) if the PostSampleType is Samples. Specify
a time period (0...(SamplePeriod ∗ 1000)) that covers post-samples if the PostSampleType
is TimePeriod.
Specify PostSamples := number
TrendxVersion
Specify the version of the Trend feature.
Specify TrendxVersion := number
Publication 1756-RM084L-EN-P - January 2007