Download USER`S MANUAL

Transcript
E. INSTRUCTION
01. - Check if the power supply is normal and makes sure both supplied and utilized
voltage are the same.
02. - There is an oil level indicator in the inner side of the pot,
oil should be poured in quantity depending on amount necessary.
03. - 1) Plug-in to start operating, a green indicator light will turn on.
2) Turn the thermostat clockwise to the desired temperature degree level.
A yellow indicator will turn on and green indicator goes off simultaneously,
therefore the heating elements begin to work and oil temperature rises
04. - 1) When oil temperature rises to the preset degree, its controller will cut off power
automatically
2) Once oil temperature lowers, its controller will give power again automatically.
The yellow indicator will turn on and green indicator will go off, heating elements
begin heating up again and oil temperature rises.
3) It does this repeatedly to make sure oil temperature is constant in the preset
degree.
05. - The pot cover is designed for keeping clean and warm. When covering the pot,
please make sure there is no water on the cover in case it drips into oil.
06. - 1) There is a hook and handle on the Clip-On Frying Basket for smaller foods.
2) Drop the baskets into oil pot, lift them up once its done and hang them on top of
the pot to let the oil filter out.
07. -
After operation please turn the switch to “off” position and unplug cord to cut off
power supply.
08. - 1) Please get rid of the old oil once oil temperature is drops low.
2) First, cut off power supply then take out the electric terminal box together with the
heating elements, making it more convenient to clean the oil pot.
09. - To ensure product durability and effectiveness please clean each and every part of
this equipment frequently.
10. - The oil pot partition board is designed to protect the heating elements,
place the partition board into oil pot when frying food.
11. -
1) There is a constant temperature in the electric terminal box.
The displacing temperature is 230°C; reset temperature is less then 170°C.
2) There is an “abort button for over-heating” on the side. When temperature goes
over the limit, press the abort button to restart.
12. - There is a micro-limit switch inside the electric terminal box, when placed in bottom
box power goes on, when taken out power goes off.
13. - Please use fresh vegetable oil which better prevents from over boiling.
688005-55 en ma 2014
4