Download VSA Technical Manual

The Control Panel
Power button: This supplies power to the OPTEK. The unit is turned on and off using this button.
Emergency Stop Button - All OPTEK units are equipped with an “Emergency Stop" Switch in case of an
Emergency. Please make all operators aware of its location and purpose.
Mouse - Provides Input to both the computer and the video interface.
When used on the computer monitor it controls all Microsoft Windows functions and all Metronics QC5000
functions.
OK button - Press this to preview the data points gathered.
Enter button - Press this to accept the data points gathered for a feature.
Trackball - This control allows the user to fine position the sample.
Joystick - Moves the transport into position in the X and Y-axes and when focusing.
Z-Axis Toggle - Switches the function of the Joystick from X/Y movement to Z-Axis movement
Fine positioning - Allows for more precise positioning of the transport or Z-axis (focus).
The Keyboard - Supplies input to the dialogue boxes, which the software provides.
Note - Selecting the Z-axis toggle, "Run" or Fine positioning switches will engage that function for both the joystick
and trackball.
9