Download HOBCOM

MESSAGES______________________________________________________HOBCOM under VM/CMS
ERROR REVM0010 CONNECT RETURN - xxxxxxxx
An error was detected while establishing the connection. The meaning of the error messages
can be found in the 'VM System Programmer's Guide', in the chapter on IUCV Function, Return
Codes, Parameter List and External Interrupt Fields.
ERROR REVM0011 IUCV RECEIVE IPRCODE=xxH
An error was registered during a RECEIVE. For information on the error codes consult the 'VM
System Programmer's Guide', in the chapter on IUCV Function, Return Codes, Parameter List
and External Interrupt Fields.
ERROR REVM0012 IUCV SEND IPRCODE=xxH
An error was registered during a SEND. For information on the error codes consult the 'VM System Programmer's Guide', in the chapter on IUCV Function, Return Codes, Parameter List and
External Interrupt Fields.
ERROR REVM0013 RESET BY OTHER COMMUNICATION-SYSTEM
The second HOBCOM has sent a reset due to erroneous data.
ERROR REVM0014 WRONG DATA
Illogical data was encountered in the data stream.
ERROR REVM0015 DATA-ERROR
The second HOBCOM sent wrong data; the wrong command is displayed.
ERROR REVM0016 LOGIC ERROR IN XCREVMP
A logic error was registered to the program.
ERROR REVM0017 RECEIVE-DATA ILLOGIC
The data coming from VM was illogical.
ERROR REVM0018 SEVER RECEIVED
An error was received during a SEVER.
ERROR REVM0019 TERMINAL-COMMAND BEFORE COMMAND F0
Please contact the HOB-Software-Support.
128