Download LabVIEW Quickstart Guide

Chapter 4
Instrumentation
Run the Demo Scope VI
If you do not have instrument I/O hardware installed, you can run the
Demo Scope VI to see an instrument I/O example. The Demo Scope VI
is the demonstration equivalent of a Getting Started VI for an actual
instrument driver.
12
9
3
You can complete this activity in approximately 5 minutes.
6
1.
Open the Demo Scope VI instrument driver in
LabVIEW\vi.lib\tutorial.llb.
2
3
2.
Run the program to acquire data from one or two channels on your
oscilloscope. Change timebase and volts per division settings to see
the effect.
3.
Click the square STOP [F4] button to stop the VI.
Run
LabVIEW QuickStart Guide
4-6
© National Instruments Corporation