Download Wavelink Telnet Client User`

200
Wavelink Telnet Client User’s Guide
8 Bit Control Codes
Indicates whether to use 8-bit ANSI control codes for
VT-type emulation.
Possible Values: <Enabled> <Disabled>
Default: <Disabled>
Backspace Sends Delete Indicates whether the Telnet Client should send a
delete control character when a user presses the
backspace key.
Possible Values: <Enabled> <Disabled>
Default: <Disabled>
IBM Host Settings
Use the IBM Host tab in the Settings dialog box to configure parameters for
IBM-type emulation. If the host profile is configured for VT-type emulation,
you do not need to configure the IBM Host tab.
The following table describes the configurable options in the IBM Host tab.
5250 - Column
Separator Dot
Indicates whether the Telnet Client displays a period
or vertical line between each character when the host
system uses a special column format mode.
Possible Values: <Enabled> <Disabled>
Default: <Enabled>