Download Wavelink Telnet Client User`

Chapter 3: Host Profiles
45
NOTE For information about using the Microsoft ActiveSync utility or the
Avalanche Telnet Client to download configurations to mobile devices, see
Deploying Configurations on page 24.
Host Profiles and Wavelink TermProxy
The Telnet Client provides integration with Wavelink TermProxy 2.x and 3.x.
Wavelink TermProxy provides proxy services, mainly for session persistence,
between the Telnet Client and host systems.
NOTE For more information about Wavelink TermProxy, contact Wavelink
customer service. Appendix D: Wavelink Contact Information on page 261
provides Wavelink contact information.
You may use the Host Profiles dialog box to configure the following:
• TermProxy-only connections
• TermProxy-failover connections
NOTE TermProxy support (via the Host Profiles dialog box) is only available in
version 5.0 (and greater) of the Telnet Client. While TermProxy 2.x allows
connections from any type of Telnet Client, TermProxy 3.x requires
connections from a 5.0 (or greater) Telnet Client.
Configuring a TermProxy-Only Connection
By default, if the Telnet Client cannot connect to the specified TermProxy
server, then it will attempt a direct connection to the host. You may, however,
configure the Telnet Client to only connect to a host through a Wavelink
TermProxy server.
To configure a TermProxy-only connection to a host system:
1 Access the Host Profiles dialog box.
2 Select the host profile that you want to configure.