Download Dolby Lake Controller Manual

Auxiliary Output Channels
With the Aux‐1 tab selected, tap Aux Output Functions. Tap HPF Enable, then LPF Enable to activate both filters. To adjust the slope of these filters: 1.
Tap Filter Select. A scroll bar appears displaying available HPF/LPF types. 2.
Drag the scroll bar or use the WW and XX buttons to view available filters. 3.
Select the 24dB Linkwitz/Riley filter from the scroll bar. 4.
Tap Filter Set to activate this filter, then Yes to the warning message. Note: To protect loudspeaker drivers, the audio output for the affected channel is muted momentarily while the settings are changed. 5.
Select the HPF by tapping its filter box located top left of the screen. 6.
Select the 18dB Butterworth filter from scroll bar. 7.
Tap Filter Set, then Yes to the warning message. 8.
Tap Aux Output Exit to return to the EQ/Levels menu. Note: Steep highpass and lowpass filters (48 dB) require more EQ resources than shallower slopes (6 dB). ®
®
Dolby Lake Controller Manual
101