Download Dolby Lake Controller Manual

Firmware Upgrade Using the Dolby Lake Controller
The Processors will be updated with the latest firmware. The percentage value indicates the status of the update of that unit. A green check mark indicates a successful update, or that the current firmware already matches that selected at the top of the screen: A red cross indicates the firmware has not yet been upgraded to the selected target firmware version: When you are using the Contour Pro26 or Mesa Quad EQ update utilities, a separate column is displayed for the ARM and DSP updates. 6.
Wait for all Processors to be upgraded. A message appears, indicating that you must restart the updated frames. 19.2
7.
Cycle the power of each Processor by turning the power switch off, then back on. This completes the upgrade process and resets the Processor to the default factory configuration. 8.
Tap OK, then tap Exit to quit the firmware update utility. Firmware Upgrade Using the Dolby Lake Controller
We recommend using the Dolby Lake Controller software only for upgrading small numbers of Dolby Lake Processors. The Firmware Update Utility provides a faster upgrade process for large networks. ®
®
Dolby Lake Controller Manual
237