Download SPSPro User Manual

Transcript
SPSPro
FGPS Operation Manual
Release:
Date:
6.50
15 May 2012
Page 51 of 65
Figure 8-7
8.2.5.5 Undoing Edits
For files which have not been saved, i.e. those whose branch icons are red, all edits which
have been made may be undone by choosing from the menu Database | Undo All Edits.
8.3
Interpolating Receivers
This function is used to interpolate receivers in situations where only certain receiver
positions have been computed at regular intervals. For example every 5th receiver may have
been computed using an acoustic positioning system and it is required to interpolate the
receivers between the existing ones.
The SPS receiver file should contain only the computed receivers, for example as shown in
Figure 8-8 and Figure 8-9.