Download SPSPro User Manual

SPSPro
FGPS Operation Manual
Release:
Date:
1.1
6.50
15 May 2012
Page 7 of 65
Projects
A project is a set of parameters defining all of the file locations and program parameters.
This information is stored in a Project File with the extension “prj”. When the software is
initially installed, the default Project File is “SPSPro.prj”, located in the program folder.
1.1.1
Creating and Opening a Project
A project is created by first saving the current project as a new project by choosing File |
Save Project As from the main menu, and then changing the setup parameters (see
Setup).
To open a previously saved project choose File | Open Project from the main menu.
1.2
Main Toolbar
Figure 1-1
Displays interactive map of the SPS file set for the selected display type.