Download initio®

ii
Initio Corporation • 2188 Del Franco Street • San Jose, California • 95131-1575
http://www.initio.com
Copyright
Copyright©1998 Initio Corporation. All rights reserved. This document may not, in whole or part, be copied, reproduced,
reduced or translated by any means, either mechanical or eletronic, without prior consent in writing from Initio Corporation.
Initio Corporation assumes no responsibility for errors or omissions in this guide. The information contained in this manual, as
well as product design, is subject to change without notice.
Trademarks
Initio, the Initio logo, and the “INI-” prefix are registered trademarks of Initio Corporation. SmartSCSI, ISGE, I/OSPEEDWAY, I/OEXPRESSWAY, I/OHIGHWAY, I/OTHROUGHWAY, I/OSUPERHIGHWAY, and I/OBAHN are trademarks of Initio Corporation.
MS-DOS®, Windows®, Windows®95, and Windows NT® are trademarks or registered trademarks of Microsoft®Corporation.
NetWare™ is a registered trademark of Novell®,Inc.
SCO® is a registered trademark of Santa Cruz Operation, Inc.
UNIX® is a registered trademark of Unix System Laboratories.
IBM® and OS/2™ are registered trademarks of International Business Machines Corporation.
Intel®, i386, i486, i486DX2, and Pentium™ are trademarks of Intel Corporation.
Other manufacturers’ product names that appear in this manual are for identification purposes only and are acknowledged to be
trademarks or registered trademarks of their respective companies.
Initio Technical Support
If you have questions about installing or using Initio products, check this document first. You
will find answers to most of your questions here. If you need further assistance, please contact
us. We offer the following support and information services:
Monday - Friday: 8:00 AM to 5:00 PM Pacific time
• Phone: (408) 577-1919
• Fax: (408) 577-0640
Initio provides on-line support for software upgrades, utility programs, and other information 24
hours a day; using 8 data bits, 1 stop bit, and no parity at speeds up to 28.8K baud.
• Initio Corporation BBS: (408) 577-0431
• World Wide Web: http://www.initio.com
• Email: [email protected]
Outside of the US and Canada, contact your authorized Initio distributor. If you received your
Initio hardware product as original equipment in a computer system or as part of a hardware
bundle, please contact that manufacturer for technical support.
The following information is needed to assist in problem resolution:
• Model type
• Serial number
• Product description
• Operating system & version number (i.e. Windows 95)
• Software driver product type and version number
• Motherboard BIOS version
• Location of purchase
The README.TXT File
The README.TXT file on the INI-9XXXU/9XXXUW DRIVER DISK 1 contains important
updated information and corrections to this User’s Manual. README is a standard ASCII text
file that may be read with any word processor or text editor.
To view the README file from the MS-DOS prompt, type the following command from the MSDOS prompt:
C:\> type readme.txt | more
This will permit you to page down the file, one screen at a time to read the file.
initio
®
P/C: D117-01
September 1998
First Edition
Printed in the USA