Download Eddy DK

Chapter 9. Appendix
9.2 System recovery via USB
Even if the flash in the user area has been damaged, it does not affect system booting. But if the system
continuously reboots due to user program failure, or if the system is inaccessible as a result of wrong IP setting, you
have to change the system to factory default status.
You can reload firmware via USB to change the system to default status.
9.2.1
Firmware Upgrade Utility Program
The AT91 ISP can be downloaded from the ATMEL Web site at the following URL:
http://www.atmel.com/dyn/resources/prod_documents/Install%20AT91-ISP%20v1.12.exe
If the URL does not work properly,
Go to the ATMEL homepage www.atmel.com
Click Product > Microcontrollers > AT91SAM 32-bit ARM-based Microcontrollers > Tools & Software > Evaluation Kit
> AT91SAM9260-EK > AT91-ISP.exe (v1.12 current release)
9.2.2
Installing Upgrade Utility Program
The AT91 ISP can be downloaded from the ATMEL Web site at the following URL:
http://www.atmel.com/dyn/resources/prod_documents/Install%20AT91-ISP%20v1.12.exe
If the URL does not work properly,
Double-click “AT91-ISP.exe” file and
begin the installation process,
then click Next.
On the splash screen, click I Agree.
95