Download PC System Boards

Transcript
03_0789735644_ch02.qxd
6/7/07
12:48 PM
Page 79
79
Expansion Slots
PCIe Slots
PCIe employs four slot connector sizes. The ×1 slot contains 36 contact positions. The ×4 slot is physically larger and has 64 pins, the ×8 version uses 98
pins, and the ×16 has 164 pins. Figure 2.15 shows the different PCIe expansion
slots and their pin assignments.
FIGURE 2.15
PCIe slots and pinouts for each.
The number and arrangement of PCIe slots on system boards is largely up to
the discretion of the system board manufacturer. The BTX form factor specification calls for one ×16 slot and two ×1 slots for its system boards. The ×16 slot
replaces the traditional AGP slot (covered in the next section of this chapter) for
the graphic display adapter. Some system boards include two ×16 slots, whereas
others offer a mixture of ×8, ×4, and ×1 slots. These system boards may also
include some number of traditional PCI slots.
It is permissible to plug PCIe adapter cards with fewer lanes into a larger slot
(for instance, a ×8 card into a ×16 slot). The card’s edge connector will not fill
the slot, but the electrical contact connections should line up properly and the
card should function correctly. The PCIe host adapter (known as a PCIe switch)