Download PDF - Advanced Micro Controls Inc
Transcript
APPENDIX B USING OLDER SD17060B-25 DRIVERS Applicable Units This appendix applies to all SD17060B-25 drivers manufactured prior to December of 2008. The inputs of these units were designed for use with 24Vdc outputs and will not work with 5Vdc differential input signals. You will be able to determine the date of manufacture from the serial number on the driver. Serial numbers for all AMCI drivers are formed from a date code and sequential number. The serial number format is shown below. "D" prefix on all Drive Serial Numbers D12080135 Dmmyynnnn Digits 1&2 Month of Manufacture Digits 3&4 Year of Manufacture Serial Number of the 135th drive manufactured in December of 2008. Digits 5-8 Sequential Number within the month For SD17060B-25 Drives... h If your month and year of manufacture is December of 2008 or earlier, (digits 1 through 4 are “1208” or less), then this appendix applies. Using Older SD17060B-25 Units Because of their internal current limiting resistors, the inputs on older SD17060B-25 drivers require 24Vdc to operate. They cannot be used in 5Vdc or 12Vdc systems. Newer SD17060B-25 units (manufactured after December, 2008) can replace older SD17060B-25 units without system modification. 20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786 Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com 17