Download User Manual - C-MOR

C-MOR
3.1.1 System Name
Under System Name you can find the current system name of this C-MOR. The default system name is
“C-MOR”. Special characters should be avoided when setting up the system name.
Mainly, the system name is used for easily distinguish your C-MORs from each other if you have more
than one in operation. The system name is also used in all emails all sent from C-MOR and in various
places in the user interface.
3.1.2 Change IP Settings
Under Network Configuration the current network configuration of C-MOR is displayed. There you can
change the IP address settings of C-MOR, network mask, standard gateway and DNS server. The changes
are immediately active, meaning that you can only reach C-MOR over the newly defined IP address. CMOR continues working at that point!
By clicking “Change IP Settings” the following entry mask appears for adjustment of IP settings:
User Manual
Page 38