1
Download Shift & Tilt Bellows System
Transcript
Shift & Tilt Bellows System 4.3. Attaching the Lens • Pull tight the clamp for lens rotation ➪ photo. • Turn the bayonet ring of the unit’s lens mount receptacle counterclockwise as far as it will go. • Push the lens into the lens mount receptacle without catching it at the edges. One of the four slots on the lens mount must fit over the index pin ➪ photo. • Press the lens flat onto the lens mount receptacle and pull the bayonet ring clockwise to tighten. Do not over-tighten. 8
