Download PDF

Workflow 1: Set Up & Explore the System Features
Connect the null modem serial cable between COM1 (labeled “1” on the target
platform dongle) and the DB9 (RS-232) serial port on the development host. See
Figure 34 - Target Platform Serial Connector and Figure 35 - Development Host Serial
Connector.
Figure 34 - Target Platform Serial Connector
IMPORTANT: Large “X” marks in Figure 34 - Target Platform Serial Connector
indicate serial ports you cannot use to connect the development host to the target
platform. Make certain to use only the serial port connector labeled “1”.
NOTE: Optionally attach the target platform to an Ethernet network cable, and
connect to the development host over Ethernet. Ethernet requires configuration to
become functional, with either a static IP address or a DHCP configuration with a
DHCP server on the network.
Intel® Industrial Solutions System Consolidation Series User’s Guide for v. 1.0b
SCS 111K
Document #550658-1.0
61