Download 7 - budpak.co.uk

Contents
Warning
Warning :
Please remember the model and series
number of the projector in case of lost.
Please carehlly check all accessories
with the pack list before throwing the package away.
............................................................
Introductions
4
Installation.. .............................................................
7
full setting.........................................................
7
standard setting ( front projection) .....................8
installation method
9
input terminals ...................................................
10
Remote control............................................................11
Panel instruction ......................................................
12
Turn onishut down
13
turn on ...............................................................
13
shut down ............................................................
13
Image
......................................................
14
focus adjustment... ................................................
14
keystone adjustment
14
Menu
............................................................15
1, Menu
method
15
2, parameter adjustment... .......................................
15
3, picture
......................................................
16
4, Audio
16
.............................................
......................................................
.............................................
When you use this projector, please carefully read user manual
Warning :
High brightness lamp!
Avoid staring or look directly at the light,
specially for children.
1-
Warning: Avoid to place the projector in wet condition
in case of the electric shock danger.
A
A
..........................................
...............................................................
It indicates there is a instruction
for important operation
It indicates there is a dangerous
Voltage inside that may cause shock
Warning : As
an A-class product. the pro;ector may cause radio lnterfererlce
Users shall take effective measures to deal with it.
About the remote control battery
Thc remote control battery should be lixed correctly
Otherwise it will be damaged for overheat
Make sure the rcmote control out of children reach
Safety precautions
S
I
,i
I
11
l'
'
1
il
1
Warning;
when use this projector ,please read this manual carefully.
If wrong operation ,it will cause electric shock or fireso when use
and repair this projector ,please comply with the following points.
l ,Read manual
Beforr use thls projector ,please
read full manual carefully and
operate according to this manual instruction
?:Clear
when clear this projector ,please pull
out the power cable. Use the wet cloth
to clear,not the cleasner
Caution
..
9,protect the power cable
Please confirm the power cable
are perfect when connect the
projector.
10,Thunder
when the thunder hiappen or long timc
no u s e , please pull the power cable
out of projector.
11,Reoairmsnt
. .
As the high voltage inside ,please
donut o p e ~or
l try to repair the
projector by yourself. . Please ask a
professional technician to repair
the projector,
12, Far away Heat device
please make sure this projector far
away other heat device . It will
3.Accessury
please use our recommended accessory.
Or it will damage the projector.
4,Use environment
Donot place the projector in wet environment
5,installation and'fix
please place this projector in stable table
6 Ventilation
the ventilation in the projector are best
damage the projector service life
for projector work stably Donot let the dust
wall up the filter. Or it will cause the projector
high-temperature protected. So please use the
water to clear the filter per month.
7, Power
please make sure the power sane as your
projector inquiry specification. (220 V or llOV)
8, Earthing wire
this prujector has earthing wire
It is t h e e pin plug.
About the installation
In order to improve the projector service life,.
It shouldnot place in a wet and
ventilation condition,
Donot put the projector under the sunshine
directly.
Projector working temperature: 0°C--170°C.
Projector store temperature : -20C-+70'C.
Donot block (he ventilatiun-winduw
of projector
lflhe prujcctor interior temperahlre
are too hot. the machine will be shut
off automatically.This is hot protected system.
So please clean the filter of projector
per month . It is very important.
Donot let the dust cover the filter.
Warning :
About Open and close the ~rojector
when open the projector ,connect
the power cable and press the "power"
key on the panel .the projector will
work ,bnt the lamp will be bright more
and more .After 5 minutes, the lamp work
normally
when close the projector, press the power
kcy again. And then the lamp shul uff.
But the fans still work until 5minutes later.
When close the projector ,donot pull out
thc powcr cable directly. After 5minutcs,
the projector will shut off automatically.
.
Fans will adjust the temperamure , it is controlled hy sysletn when tllc pra]cctor ivark,
the fans turn slowly or quickly, so the fans noise ore ditrerent. Bln il is nolmai.
when theprojcctor work ,donot pull out thepwer cable, if the fans stop 10 work,i! will cvusc
the projector interior tempemure very high, so it may dvrnvge the projecror.
Introductions
Instructions
..
Projector Description
Right
The projector is able to connect signals: HDMI,YIPbRr,VGA
and TV(optional),as well as stereo audio input. Please connect
in reference to the following diagrams
Front
I
I
0
Q
Focus Iens
IR receiver
Q Hight-feet adjustment
@ Cool winds input Ventilation
I
0
0
Right channel speaker
0
0
Left
Back
0
0 Hot winds output ventilation
0 Powel. switch
0 Input terminals
Details at page 10
Cool wind input ventilation
Q Left channel s~eaker
Projector Installation
Projector Installation
..
Standard setting (Front projection)
Please refer to the below sheet, install the projector in distance according
to the screen size. Please make sure the projector is placed on stable mount,
Take care of the ventilation condition (nothing near 30cm blocking )
1
Distance
16:9
I
4:3
Installation method
Contact a professional service man to mount this projector to a ceiling
Follow the instruction below for the corrcct projector positions:
1
a Front projection
a Rear projection
Ceiling mount
Ceiling mounl
The data may have 3% error, due to the image size according to the
projector and screen. If the distance is less than 2M or morc than 5M ,
the iinage Inay appears unclear
Warning :
Please check the following pictures for the trapezoid adjustment
i
I
c o r r e c t itistallation
~
installed correctly
the imare is rectaneular
lncorrcct installation
,,,,,,
.,,,,,,,,,,,,"",,,"."-
a Front projection
@ Rear projection
Table mount
Table mount
Warning :
1 ) T h s projector might damage beyond repair when it is incorrectly mounted
on a ceiling or when it is in conectIy installed on a surface or installed on a
incorrect surface. It may also inflict damagc to people ncarhy
2) This projector can only be used in an enviromnent with a temperature
not exceeding the range of 0-35 degreeThe projector may malfunction if temperatures
vary outside the nom~alopcrating rage
3) The sharpness of the screen might be intempted when the
projector is being used in a dusty,wet,moist or smoke fillcd environment.
The projector might malfunction in a moist or wet enviromncnt
4) Take care of the sufficienl venlilation around the projector.
Otherwise this projector might overheat and cause life threatening situations
5) Thc first operation of the projector inay cause a unclear imagc,
Please refer to the image adjustment for help
Remote control
Input terminals
Signal terminals description
Remote control instruction
.
.
-
Name
I
Description
Y l ~ b l ~ r1I Conaonent video inaut
Video
I AV inaut
I Lout, Rout I Audio outsut
I Lin, Rin IAudio inaut
I PC-RGB IN I VGA inaut
L
I
Svideo
TV
HDMI
USB
I
-m.ma
.AUTION
1
L
I
I
I
l Analog TV input (optional)
~ [Sub
P
y e low
Menu1 + [Delete]
l
IConfiml Delete
Blue
~anurlchannelsarchChannel E d i t
1
ll
Save
~ ~ 1 ~ 8 -
l Lc,,ao.
MY*"
l
IhP
l
Cautions:
I
~ H D M ISiena1 inaut
~ U S Bsignal input (details at page17)
.......
urn off the powcr of projcctor and thc dcvicc before connecting,
Either on may cause a break down of machine
$?Check the shape of theplug,DO NOT try the wrong plug
R
tiieenl
1
l Svideo inout
----.--m-
I
MultimediaMade
1
*DO NOT mix-use the new and old
batterv
2TPull out the battery if you arenot
going to use it for a long time
*Make
*Please c h a n g e new battely w h e i ~the
remote rnalfunctlons.
$?Do not place the remote in wet or hcat
condition
sure n o t h ~ n gqtands in the
remote and 1R
rn~ddle
of
.
.
*Avoid the l i g h ~shinc on the
IR dircctly
*Point the remote right to IR within
6m,and 30 degrees
Menu Setting
Image adjustment
-..--p--
1
~~
..
When you use the prnjector for the first time .It normally will
appear image faintness or the image is trapezoid. This is caused by
the wrong lens focus or trapezoid correction
h s e follow the belo!+-geps ty correct:
.- . ..
'7i
1. Menu setting method
,
Focus adjustment
1 , Rotate the lens into projector, the rotate it out slowly.At the same time,
looking at the resolution point carefully.\Vhen the image is clear, it is the
best situation of the lens
3. Select the adjust interface,use " A / v "
key to clioose the wanted item
(picture 11)
4. Press "OK" or " 4 / b n to adjust
Picture1
Keystone
If a projected picture has keystone distortion, correct image with
Keystone adjustment. The image becomes trapezoid shape when the screen
or projector is not leveled. Please reposition the projector to improve its
angle to the screen.However,the circumference of the image may not be
focused
1,
2. Parameter adjustment
A. Press"menu"key, until display the above
picture of the menu:
h. Press "A/'" key, elect the option that
need to adjust
c. Press "OK" key, use " 4 / b U bunon
to adjust the certain parameters
d. Press the "menunkey again exit the
menu page parameter adjust station,
I
I
7
-
Pict~ue2
Menu setting
Menu Setting
6. Menu setting method
3. Picture Menu
Appendix I
Picture
Image contrast adjuslment
7,multimedia menu
Image brightness ildjustmcnt
HUE
0-100
Image hue ad,jurtment
Image sharpness ad.j!justmmt
- ~-
a Appendix I1
The setting of Hight-width is diiferent under differc modes, zoom is not >*lid in pierure mode
4. Sound Menu
CAUTIONS:
I ) The nsh interrace supporl USBI I
USB20,inclndlng hard drive and fresh
drives
Multimedia Format
5. Time Menu
4) The nab interface can support
most drives but isnot oniverssl,
any unknown device prubiem is caused
by the device drive
5 ) The totalvollage of the connecleddevices
shall n o t b e over 1200mAh,lhe problems casued
by the wrong oprrotionwill not be warranted
AudioDecode
OivX.Xud.MPEO-4
HPEG-I. MPEO-l
2) Theman. Storage supported is 4OOGb
3) Thesystem format supported.
FAT16. FAT32, NTFS
Video ~ e c o d e
17*rl.?urm~1
MOVIE
d.?
rmirmvb
mav/mkv
l
I
H. 2 6 1
. m03
~~,
A D )
M P 3 W M I , AAC
MPEG-l
; RaalMada."do.
--
1-No,,-inierlaoed
lni~llarsd
1l
Ilr
Trouble shooting
.1
The projector is so easy to use as the TV.While some problems my
occur because of the environment and voltage. Please try to recognize the
fake malfunction before refer to the technicians
1
Problem
l.when rum on
the power switch,
the indicator light
do not work
l
The possibility reason
QThe power can does not connect well
l
QThe power switch fuse is burned
QCheck the over-heat protection system
QThe power switch turn on or off?
2 . The remote
control can not ;
turn on pro lector^
QThe remote control out of battery?
QSomething stands between the remote and IR
QStrong light on IR directly
0 1 s the channel set-up correct?
Qls there an input signal?
0 1 s the input cable plugged
3.No image on
the screen
4. Auto-offafter
working for a
while
QUnder PC model
,IS the
:F
FAQ :
@ Q : Blue screen,no picture,no sound
A : Input cables connected right?
Q Q : Picture right, no sound
A: Input cables connectedright?
Volume at min. Or on Mute
0 Q: Audio right,nopicture
A: Input signal connected right?
In VGA mode, The PC refresh rate >75Hz
In VGAmode, The P C conlrasl ratio is >1024*768
@ Q : C a n ' t find devices when pluged with hard drive or fresh drive
A : RC-plugthe device
Check if the device is broken
C$ Q : C a n ' t play the movies
A: The format of the video is right?
Files is broken?
Device is broken?
@ Q : There is picture ,no sound?
1
A: The decode system d o e s n ' t match
i
1
well ?
refresh rate >7sKHz?
QWhen the projector connect with the notebook,
set the screen as VGA mode
QThe projector ventilation is block
VGA with notebook
with the note book, you may need
to press the Fn+F*(withCbonthe
button
1
1
NEG
SOTEC
1
1
3
[Cn)
QThe voltagc is not stable
QThe over-heat protcctiun system
+ [q
LENOVO
! DELL
P
P
1l
Specification
Packing list & Accessories
Please confirm the following after you open the package
LCD
Type
Input signal
video
5. 8"TFT Matrix RGB
Component video(Ypbpr), VGA,
Packing list:
HDMI, USB, S-v ideo, TV (optional)
Audio
Stereo
Output signal
Audio
2W*2 Spcaker(optiona1)
LCD
Native resolution
Contrast ratio
1280x768 support 108OP
2000 : 1
Lens
Aperture
Focus
LED
Colortemputure
Life
Continuous working time
Size
Brightness
Keystone
< 24homs
60-1 20inch
2800 Lumens
2 15 degree
Power
Voltage
Power consumption
100-240V240W
Working condition
Temperature
Humidity
+VC-+3Vc
10%-65%
Store condition
Temperature
Humiditv
Remote connol
Machine
Frequency
Size
Weight
Image
Optional accessories :
50-6OHz
1 . Projector screen (Matt White,Electric)
2. Ceiling Mounts
38KHr
350*275*140mm
3Kg
(Any changes on the parameter will not be noted)
Warrantv clause
1,warranty range
All projector is purchased by our distributor
or agent ,we offer the warranty service during
valid warranty time.
..
Warranty Card II
The following information shall be filled by sellers
q
Zin Code
Address
1temNO.
ModelNO.
Series NO.
Seller
Contact
Zip Code
Address
Sales Date
Installation Date
2,warranty time
From the date of production in the projector label,
w e offer 12 months warranty period for projector.
But the halogen lamp only have 6 tnonths warranty;
the LED lamp have 24months warranty
3,warranty condition(except for following status)
1)warranty card or purchascd invoice are lost.
2)alter or dilacerate the date of production in the projector lable
3)user do not operate the projector accroding to
use manual and damage the projector
4)projector is out of warranty time
5)Flood fire as natural disasters and all the factors of force
majeure damage
4,warranty service
if your projector is broken during the warranty period,
please contact the distributor where you bought .They
will offer you the repairement serivce .
1
lnvoice NO
1
1
1
Warranty card I
..
Maintenance record
RerurnDate:
Cause o f Malfunct<on:
Repair Rccord:
I S r r r i c c Station:
Return Dare:
Cause of Mslfuclion:
Rcpair Record:
Servicc Station:
Return Date:
Cause of Malfuction:
Repair Record:
I Servicz Station:
Return Date:
Cause of Malfuctian:
Repalr Rerord:
Service Station:
1
I
I
I
I
Test Date:
Slguaturc:
1
Test Date:
Signature:
l
Tcsr Date:
I
Signature:
I
Tcsr Darc:
I Signature:
A