Download User`s Manual
Transcript
1. Introduction 1.4. Introduction to the Communication “System” Architecture Each LUFP1 FIPIO / Modbus RTU gateway allows one PLC on the FIPIO network to command, control and configure up to 8 Modbus slaves. If there are more than 8 Modbus slaves, you will need to use an appropriate number of LUFP1 gateways. Likewise, if the gateway needs to exchange more than 26 words with the Modbus slaves (sum of the read and write operations); the Modbus slaves will have to be shared over more than one gateway. 1743315 03/2009 9