Download MetPak Base Station User Manual - Issue 1

Operation
3.2.5
MetView Gauge Ranges and Graphs
Gauge Range Settings.
MetView Pressure, Humidity, Temperature Gauge ranges may be altered to view
changes in conditions more visibly.
Note, these changes only affect MetView settings and do not affect the MetPak
Base Station output.
For instance if the typical temperature measurement range required is from +10
degrees to +40 deg C then the temperature gauge range can be adjusted to reflect
this.
Place the mouse pointer over the Temperature display gauge and double click to
bring up the Set Gauge Range screen. Change Max and Min readings to required
values, e.g. +10 min and +40 max.
Click on Set.
The Temperature gauge range will be updated to reflect the change.
Double Click
to bring up
Set Gauge
Range.
Figure 14
MetView Gauge Range
MetPak Base Station User Manual
© Gill Instruments Ltd
Page 30
After
changing
the
Range.
Last Change
22 April, 2013