Download MetPak Base Station User Manual - Issue 1

Operation
To start logging
1.
Check that the Enable Logging option is selected.
2.
Click on the OK button to commence logging and return to the console.
Note. To show that data is being recorded, the Logging button’s icon changes to a
green tick:
Logging active
Logging stopped
To stop logging
To turn off logging:
Last Change
22 April, 2013
1.
Click on the Logging button on the MetView console. Clear the Enable
Logging check box.
2.
Click on the OK button. If logging has stopped, the Logging button shows a
red background cross instead of the green background tick (see above).
MetPak Base Station User Manual
© Gill Instruments Ltd
Page 33