Download User Guide - Fujitsu manual server

8 Defining network paths (LAN)
8.1
Defining an uplink set
To define an uplink set, follow the steps below:
1. You can start the Create network wizard by:
l
l
clicking New on the Graphic or Details tabs on the Ext. LAN
Connections tab
selecting New Uplink Set in the context menu of an uplink set.
The Create network wizard is launched.
2. In the first step of the wizard, you specify what type of uplink set or what
network you wish to create. You can choose between:
l
l
l
l
Internal network
Creates an internal network without a connection to an uplink port. This
establishes a connection between the server blades (internal IBP
connections) without there being a connection to an external network.
To find out what other entries you need to make during the further
course of the wizard, see section "Defining an internal network" on
page 309.
Single network (selected by default)
Creates an uplink set with a network. The uplink set and the network
have the same name. To find out what other entries you need to make
during the further course of the wizard, see section "Defining a single
network" on page 309.
VLAN / Service VLAN networks
Creates an uplink set to which one network or even multiple networks
with a VLAN ID can be assigned. To find out what other entries you
need to make during the further course of the wizard, see section
"Defining VLAN networks" on page 312.
Dedicated Service network
Creates an uplink set with one dedicated service network. To find out
what other entries you need to make during the further course of the
wizard, see section "Defining a dedicated service network" on page
315.
You can view the configurations made on the Graphic and Details tabs.
308
ServerView Virtual-IO Manager