Download User Guide - Fujitsu manual server

5 Virtual-IO Manager user interface
Automatic assignment is only possible if you specified address
ranges when you installed VIOM.
Next to each virtual address, you see the status of the address. As long as at
least one address has an error or warning status, the buttons Next and Finish
are disabled.The status can have the following values:
Status
Significance
Allocate (OK)
The address is automatically
assigned.
OK (OK)
The address is valid and has
not been assigned yet.
Not checked (warning) The address entered has not
been checked yet. Click Check
Addresses to change this
status.
No value (error)
No address is specified and
Allocate virtual address is not
selected.
Not unique (error)
The same address is in use for
several ports.
Out of range (error)
The address is outside the
specified address range.
Syntax error (error)
The address is syntactically
incorrect.
Already used (error)
The address is already in use
Check Addresses
A check is performed to determine whether the addresses are currently in
use in other profiles and whether they are within the range specified. This
button is only active if for at least one address Allocate virtual address has
not been selected and all virtual addresses have been entered correctly.
212
ServerView Virtual-IO Manager