1
Download Untitled
Transcript
TACACS+ It means Terminal Access Controller Access-Control System Plus. It works like RADIUS does. Click the TACACS+ Setup to open the following page: Available settings are explained as follows: Item Description Enable Check to enable TACACS+ feature. Server IP Address Enter the IP address of TACACS+ server. Destination Port The UDP port number that the TACACS+ server is using. Shared Secret The TACACS+ server and client share a secret that is used to authenticate the messages sent between them. Both sides must be configured to use the same shared secret. Confirm Shared Secret Re-type the Shared Secret for confirmation. After finished the above settings, click OK button to save the settings. Vigor2925 Series User’s Guide 338
