Download Operation Manual

OPERATION
2-7. SPOT DWELL(GROUP)
* KPD-M901 / M1601
(1) Select desired Camera by using ▲▼ button and press
‘ENTER’ button.
(2) Input desired second by using number button and press
‘ENTER’ button to finish the setting.
„
Can enter maximum up to 60 seconds
„
If you want to cancel, press ‘MENU’ button.
[SPOT.DWELL(GROUP)]
NO
SEC
01
▷02
02
▷02
03
▷02
04
▷02
Group No.
Camera
Group No.
1
Channel 1 ~ Channel 4
1
Channel 1 ~ Channel 4
2
Channel 5 ~ Channel 8
2
Channel 5 ~ Channel 8
3
Channel 6 ~ Channel 9
3
Channel 9 ~ Channel 12
4
Channel 13~ Channel 16
[KPD-M901]
Camera
[KPD-M1601]
2-8. VGA FREQUENCY CHANGE
(1) Press ‘ENTER’ button in Change VGA freq.
(2) Select desired video frequency.
[CHANGE VGA FREQ]
- 60HZ
[CHANGE VGA FREQ]
- 60HZ
- 50HZ
2-9. VIDEO STANDARD
(1) Select your video system
AUTO DETECTION : Set video automatically.
SWITCH : Set video according to jumper on main board.
NTSC : Set video to NTSC system.
[VIDEO STANDARD]
▷AUTO DETECTION
▷SWITCH
▷NTSC
▷PAL
PAL : Set video to PAL system.
After changing Video standard, DVR system will reboot automatically
30