Download DMP 128 User Guide - Extron Electronics

Delay Block (DLY)
The delay processor block, when inserted, provides
a means to delay the audio signal to compensate for
loudspeaker placement in situations where speakers
delivering the same signal are much farther away than
others. The delay processor block is identical to the delay processor available on the
input and described in (see “Delay (DLY)” on page 51). Typically the near speakers
would be delayed so that audio delivery time matches the speakers further away.
Filter Block (FILT)
The filter processor block, when first inserted, provides one of four
filter selections: High Pass, Low Pass, Bass & Treble filters and
Parametric EQ. Up to nine filters can be added to each filter block.
The output filter block is identical to the input filter processor block
except that up to nine filters total can be selected (see “Filter
(FILT)” on page 32).
NOTE: Selecting the Bass & Treble Filter inserts two separate filters.
Dynamics block (DYN)
A dynamics processor block, when inserted,
provides one of four dynamics processors:
AGC, Compressor, Limiter, and Noise Gate.
The available processors are identical to the
processors available on the input dynamics
processor block and described in (see
“Dynamics (DYN)” on page 46).
DMP 128 • Software Control
63