Download EPS ZF System

EPS
EPS (Expanded Polystyrene) boards to EN 13163-T2-L2-W2-S2-P4-DS(70,-)2-BS50-DS(N)2, thickness 60 mm to 200 mm,
minimum tensile strength perpendicular to the faces 100 kPa, minimum shear modulus 1 N·mm–1, FRA aged, available
in white and enhanced graphite grey
Adhesives
• Brillux ETICS Powder Adhesive 3550, cement-based powder requiring the addition of approximately 24% of water
• Brillux ETICS Powder Adhesive VZ 3600, cement-based powder requiring the addition of approximately 22% of water
• Brillux ETICS Reinforcement Plaster ZF-Sil 3585, ready to use paste (without cement) consisting of a vinyl acetate
copolymer binder in watery dispersion.
Figure 1 Brillux external insulation systems
1.4 Ancillary materials and decorative coatings must be approved by the Certificate holder. Ancillary items supplied
by the Certificate holder for use in particular locations/forms of construction include:
• starter tracks (to suit each insulation thickness)
• end stops
• sills
• render beads.
Page 4 of 16