Download Cpt Track Loader (CTL55/CTL65/CTL75/CTL85)
Transcript
OPERATION Machine Operation Operating the Lift Arms Operating the Right Control Lever WARNING � Be careful to check which pattern of lever control arrangement you are operating with before beginning operations. � Make sure the bucket is lowered to the ground before floating the lift arms. Floating the lift arms while they are raised will cause the bucket to fall rapidly and is extremely dangerous. � Do not drive the loader forward with the lift arms in Float position. � At times of combined operation of bucket and lowering, tilting the lift arms, continuation of the combined operation after the bucket cylinder has reached fall stroke will result in the lift arms rising or stopping without going lower. Be cautious of any unexpected movement of the lift arms. To lower the lift arms: Push the right control lever forward. To raise the lift arms: Pull the right control lever rearward. Operating the Bucket To roll back: Tilt the right control lever to the left. To dump: Tilt the right control lever to the right. Operating the Lift Arms Float Use the right control lever to operate the lift arms and bucket. Return the right control lever to the neutral position to stop the lift arms and bucket. Set the safety bar to the released position. To float the lift arms: Press the float switch on the right control lever. 80