Download conga-QA3 User`s Guide

Table 4
Edge Finger Pinout
Pin Signal
Description
Pin Signal
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
Power Ground
Gigabit Ethernet MDI3Gigabit Ethernet MDI3+
100 Mbps link speed
Gigabit Ethernet MDI1Gigabit Ethernet MDI1+
Gigabit Ethernet Link indicator
Reference voltage for GBE
External system wake event
Suspend status
Sleep button
Power Ground
Power Ground
Battery low input
Serial ATA Channel 0 TX+
Serial ATA Channel 0 TXSerial ATA Activity
Serial ATA Channel 0 RX+
Serial ATA Channel 0 RXPower Ground
BIOS Module disable
Boot Alternative Enable
SDIO Card Detect
SDIO Command/Response
SDIO Power Enable
SDIO Data Line 0
SDIO Data Line 2
SDIO Data Line 4
SDIO Data Line 6
Power Ground
HD Audio/AC’97 Synchronization.
Multiplexed with I2S Word Select from Codec
HD Audio/AC’97 Codec Reset. Multiplexed
with I2S Codec Reset
HD Audio/AC’97 Serial Bit Clock. Multiplexed
with I2S Serial Data Clock from Codec.
HD Audio/AC’97 Serial Data In. Multiplexed
with I2S Serial Data Input from Codec
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
GND
GBE_MDI2GBE_MDI2+
GBE_LINK1000#
GBE_MDI0GBE_MDI0+
GBE_ACT#
SUS_S5#
SUS_S3#
PWRBTN#
LID_BTN#
GND
PWGIN
RSTBTN#
SATA1_TX+
SATA1_TXGND
SATA1_RX+
SATA1_RXGND
SDIO_CLK
Power Ground
Gigabit Ethernet MDI2Gigabit Ethernet MDI2+
1000 Mbps link speed
Gigabit Ethernet MDI0Gigabit Ethernet MDI0+
Gigabit Ethernet Activity indicator
S5 (Soft OFF) – shutdown state
S3 (Suspend to RAM) – SLP
Power button
LID button
Power Ground
Power good input
Reset button input
Serial ATA Channel 1 TX+
Serial ATA Channel 1 TXPower Ground
Serial ATA Channel 1 RX+
Serial ATA Channel 1 RXPower Ground
SDIO Clock Output
44
46
48
50
52
54
56
58
60
64
SDIO_LED
SDIO_WP
SDIO_DAT1
SDIO_DAT3
SDIO_DAT5 (*)
SDIO_DAT7 (*)
USB_DRIVE_VBUS (*)
GND
SMB_CLK
/ GP1_I2C_CLK
SMB_DAT
/ GP1_I2C_DAT
SMB_ALERT#
SDIO LED
SDIO Write Protect
SDIO Data Line 1
SDIO Data Line 3
SDIO Data Line 5
SDIO Data Line 7
USB power enable pin for USB Port 1
Power Ground
SMBus Clock line. Multiplexed with General
Purpose I²C bus #1 clock line
SMBus Data line. Multiplexed with General
Purpose I²C bus #1 data line.
SMBus Alert input
66
GP0_I2C_CLK
General Purpose I2C Bus No 0 clock line
43
45
47
49
51
53
55
57
59
61
63
65
GND
GBE_MDI3GBE_MDI3+
GBE_LINK100#
GBE_MDI1GBE_MDI1+
GBE_LINK#
GBE_CTREF
WAKE#
SUS_STAT#
SLP_BTN#
GND
GND
BATLOW#
SATA0_TX+
SATA0_TXSATA_ACT#
SATA0_RX+
SATA0_RXGND
BIOS_DISABLE#
/BOOT_ALT#
SDIO_CD#
SDIO_CMD
SDIO_PWR#
SDIO_DAT0
SDIO_DAT2
SDIO_DAT4 (*)
SDIO_DAT6 (*)
GND
HDA_SYNC
/ I2S_WS
HDA_RST#
/ I2S_RST#
HDA_BITCLK
/ I2S_CLK
HDA_SDI / I2S_SDI
62
Copyright © 2013 congatec AG QA30m11 42/88