Download DriveMaster Ultra

OPERATION
5.
6.
4.3
Go to “Exit” to leave the settings menu and confirm
with the “Select” menu button [10].
Press the “Select” menu button [10] for three seconds
to leave the menu. The settings have now been
changed.
2.
USE OF THE JOYSTICK
The desired power and speed can be adjusted in forward
and backward direction with the joystick, by turning it over
the full stroke. This happens without intermediate steps.
Figure 3 shows the joystick with default forward (clockwise) and backward (counter clockwise) operation.
4.5
Ultra system is able to deliver an additional amount of
power for a limited amount of time when changing
direction by the throttle.
Sleep function:
Whenever the throttle is in neutral position for over 60
minutes (standard setting), the DriveMaster Ultra will
switch to Sleep mode limiting the amount of power
use. To switch back to normal operation switch the
system off and on by using the motor switch.
DEPARTURE
Before departure, always check the system for correct
functioning.
Follow these steps:
3. Disconnect the shore connection.
4. Turn the main switch on.
5. Put the joystick in the neutral position.
6. Turn the motor switch on.
7. Check the battery condition.
8. Choose the power program (maximum or economy).
9. Check system forward and backward.
4.6
Figure 3: Joystick
Refer to the ordering information in chapter 9 for available
types.
4.4
OTHER OPERATION FUNCTIONS
During normal operation the following functions exist and
operate autonomously:
1. Boost function:
To accommodate fast maneuvering, a DriveMaster
10
ARRIVAL
Follow these steps after arrival:
1. Put the joystick in the neutral position.
2. Check the battery condition.
3. Turn the motor switch off.
4. Turn the main switch off.
5. Connect the shore connection and make sure it works
properly.
6. Reload the batteries after arrival.
March 2011 / DriveMaster Ultra / EN