Download as a PDF

Transcript
the two most extreme gels (5h to 7h) the %CV stays around that same level observed in
all of the other gels (%CV = 45%) and the percent of matched spots is also similar to the
other comparisons (36% of the spots on the gels matched). With the exception of the
percent of matched spots between the 5.5h and 6h gels, the other gel comparisons were
quite similar when evaluated on these two criteria and no true conclusions can be drawn
at this time.
After performing this intra-set gel analysis it became even more apparent that in
order to truly evaluate these gels a standard should be developed that can be used as a
universal standard to which all gels, from both sets, will be compared to. These
observations helped to solidify the importance of the second aim of this study – the
creation of the universal gel standard. To create the universal standard gel a single
protein sample was isolated from a cell culture of P. putidaKT2440 grown to mid-log
phase on 5mM succinic acid as a carbon source. This protein sample was used to make
three replicate gels that were analyzed using Phoretix 2D. We decided to use three gels
to make the universal standard gel because previous data has shown that using 3 - 4 gels
leads to optimal reproducibility and increasing the number of replicate gels to beyond
four gels will decrease the reproducibility and matching between gels. [11] Also, in
another study conducted by Molloy and Brzezinski a universal standard gel was created
from three replicate, or sibling gels, and used for quantitative analysis. [13] These gels
were analyzed in the normal manner and then used to create an average gel by following
tutorial 7 in the Phoretix 2D user manual. Two different versions of the average gel were
created. (See figure 14) The first average gel includes spots that were automatically
detected by the program and have undergone minimal manual editing. It also includes
35