Download Instruction Manual
Transcript
I. TREND MODE 440 APPLICATIONS The 440 trend mode is used to look at signals over a period of time to see if they changes or get interrupted. Set-up the 440 as follows: Set-up Procedure: 1. Set the rotary switch to the desired function depending on the device being measured (ACV, DCV, ACA, DCA,Cap,Freq). 2. Push the button to manually select the correct range by pushing the F1 or F2 buttons then push EXIT. 3. Press the D MODE button. 4. Press the TREND (F4) button. 5. Set TIME SET (F2) and TREND TYPE (F3) for the trend being measured and RESTART (F4) press. 6. The 440 will display the trend graph on the LCD. Applications: 1. Industrial Furnace Controls 2. Climate Control a)Waveform quality 38 40