Download "user manual"
Transcript
ServerName D 252 SEQ=5 RequestParameters D 252 SEQ=10 BytesSend C 99999999 SEQ=7 SKEY=SUM RequestElapsedTime C 99999999 SEQ=11 Requests_PerSecond REAL (_Occurrences / _Interval_Unit) BytesReceived_PerSecond (BytesReceived / _Interval_Unit) BytesReceived_PerRequest (BytesReceived / _Occurrences) BytesSend_PerSecond (BytesSend / _Interval_Unit) BytesSend_PerRequest (BytesSend / _Occurrences) The //SUMMARY statement defines the summarization period of data input during monitoring. The summarization period cannot exceed 86400 seconds (1 day). When using the //SUMMARY statement, the resulting output attribute group consists of the following: – LocalTimeStamp This is a timestamp indicating the beginning of a summary interval – Interval_Unit This is as defined in the //SUMMARY statement parameter (300 seconds) – Occurrences (total count) This is the number of records summarized – Key attributes All the key attributes. In this case, all the numeric attributes defined with SKEY=SUM (total result count for a summarizing interval). To calculate the statistics, such as the number of bytes received per second, new attributes called derived attributes are created based on the default attribute group provided by the //SUMMARY statement. For example, the new attribute _Occurrences is derived from the default attribute, Occurrence. Moreover, derived attributes can be created based on the numeric attribute defined with SKEY=SUM (in this case, BytesSend and BytesReceived attributes). The attribute groups HIST_WORKLOAD_BY_DAY and HIST_WORKLOAD_BY_HOUR are based on the concept. The difference is only the summarization period defined in the //SUMMARY statement set to 86400 seconds (1 day) and 3600 seconds (1 hour). 176 Infrastructure Solutions: Building a Smart Bank Operating Environment