Download Focus 1 Drive Manual

Start-up Guide Worksheet
Improper procedures can result in personal injury or equipment damage. Only qualified electrical
maintenance technicians familiar with electronic drives and their standard safety precautions
should be permitted to install, start-up, or maintain this apparatus.
At this point all INPUT POWER must be OFF !
Obtain the following information:
Focus Drive Model
2400-8000
2400-8001
a) AC Input Line Voltage
Drive Serial Number
Drive Part Number _____________
240 Vac
120 Vac
b) Motor Nameplate Information: Armature Voltage
Armature Current
Field Voltage
Field Current
Rated RPM
Regulation Mode
_________Vdc
_________A
_________Vdc
_________A
_________ rpm
Speed ( most common case )
Torque ( read first ! )
Focus drives come to you factory set for Speed Regulation mode which is the most
common case. Even if your application requires Torque control, we would strongly
suggest that you first run your motor Speed Control initially. After you have verified
proper operation in the Speed mode, you could then switch over to Torque mode after
reading about the Current Regulation Mode.
Page 42