Download as a PDF

[5] H. Kopetz and G. Grunsteidl, “TTP – a protocol for fault-tolerant real-time systems,” IEEE Computer,
vol. 27, no. 1, pp. 14–23, January 1994.
[6] Road vehicles — Interchange of digital information — Controller area network (CAN) for high-speed
communication, ISO 11898, 1993.
[7] H. Zeltwanger, “An inside look at the fundamentals of CAN,” Control Engineering, vol. 42, no. 1, pp.
81–87, January 1995.
[8] K. W. Tindell, H. Hansson, and A. J. Wellings, “Analyzing real-time communications: Controller Area
Network (CAN),” in Proc. Real-Time Systems Symposium, pp. 259–263, December 1994.
[9] K. Tindell, A. Burns, and A. J. Wellings, “Calculating Controller Area Network (CAN) message response times,” Control Engineering Practice, vol. 3, no. 8, pp. 1163–1169, 1995.
[10] K. G. Shin, “Real-time communications in a computer-controlled workcell,” IEEE Trans. Robotics and
Automation, vol. 7, no. 1, pp. 105–113, February 1991.
[11] K. M. Zuberi and K. G. Shin, “EMERALDS: A microkernel for embedded real-time systems,” in Proc.
Real-Time Technology and Applications Symposium, pp. 241–249, June 1996.
[12] J. Y.-T. Leung and J. Whitehead, “On the complexity of fixed-priority scheduling of periodic, real-time
tasks,” Performance Evaluation, vol. 2, no. 4, pp. 237–250, December 1982.
[13] K. Jeffay, D. F. Stanat, and C. U. Martel, “On non-preemptive scheduling of periodic and sporadic
tasks,” in Proc. Real-Time Systems Symposium, pp. 129–139, 1991.
[14] W. Zhao and K. Ramamritham, “Simple and integrated heuristic algorithms for scheduling tasks with
time and resource constraints,” Jounal of Systems and Software, vol. 7, pp. 195–205, 1987.
[15] D. Ferrari and D. Verma, “A scheme for real-time channel establishment in wide-area networks,” IEEE
Journal on Selected Areas in Communications, vol. 8, no. 3, pp. 368–379, April 1990.
[16] D. D. Kandlur, K. G. Shin, and D. Ferrari, “Real-time communication in multi-hop networks,” IEEE
Trans. on Parallel and Distributed Systems, vol. 5, no. 10, pp. 1044–1056, October 1994.
[17] Q. Zheng and K. G. Shin, “On the ability of establishing real-time channels in point-to-point packetswitched networks,” IEEE Trans. Communications, pp. 1096–1105, February/March/April 1994.
[18] M. Gergeleit and H. Streich, “Implementing a distributed high-resolution real-time clock using the
CAN-bus,” in 1st International CAN Conference, September 1994.
[19] MC68336/376 User’s Manual, Motorola Inc., 1996.
[20] 82527 Serial Communications Controller Architectural Overview, Intel Corporation, 1993.
[21] A. Indiresan, A. Mehra, , and K. G. Shin, “The END: An emulated network device for evaluating
adapter design,” in Proc. 3rd Intl. Workshop on Performability Modeling of Computer and Communication Systems, 1996.
[22] C. D. Locke, D. Vogel, and T. Mesler, “Building a predictable avionics plarform in Ada: A case study,”
in Proc. Real-Time Systems Symposium, pp. 181–189, 1991.
[23] C. D. Locke, D. Vogel, L. Lucas, and J. Goodenough, “Generic avionics software specification,” Technical Report CMU/SEI-90-TR-8, Carnegie Mellon University, 1990.
14