Download Manual - CH Technologies

CONTENTS
1. Description and Principle of Operation………………………….……………..….
2. VAG Specifications…………..……………………………………………………
3. VAG Operation Procedures…………………………………………….………….
3.1. Preparing the VAG for Operation………………….………………..……….
3.1.1. Assembling the Aerosol Monitor……………………………………...
3.1.2. Assembling the VAG Parts……………………………………….…….
3.1.2.1. Without Sharp Cut Cyclone…………………………………..….
3.1.2.2. With Sharp Cut Cyclone…………………………………..……..
3.1.3. Setting Up WinDust Pro Software..……………….…………….…….
3.2. Operating the VAG…………………..……………….……………..……….
3.2.1. Loading the VAG with Powder………………………………………...
3.2.2. Setting Up the Aerosol Monitor for Operation………………………...
3.2.3. Controlling Powder Output during VAG Operation…………………..
3.2.4. Monitoring with MicroDust Pro during VAG Operation………………
3.2.4.1. Monitoring with the Control Unit……………………………..….
3.2.4.2. Monitoring with WinDust Pro Sowftare…………………..……..
3.2.5. Analysis of Aerosol Concentration Data on WinDust Pro.……………
3.3. Correction Factor (Calibration) of Dust Monitor…..………………….…….
3.3.1. Calibration Procedures with External Gravimetric Sampling…………
3.3.1.1. Gravimetric Sample Data Analysis.…………………………..….
3.3.2. Calibration Procedures without External Gravimetric Sampling………
3.3.3. Working with a User-defined Calibration Factor……………………...
4. Cleaning and Maintenance Procedures…………………………………………….
4.1. Quick Cleaning…………………………………….………………..……….
4.2. Deep Cleaning………………………………………………………………..
4.3. Re-Assembly of the Deagglomerator………………………………………..
5. Disclaimer……………………...…………………………………………………..
6. Limited Warranty……………………………………..………….…………….…..
Page 2 of 32
3
7
8
8
8
9
9
12
13
14
14
14
17
18
18
18
19
20
20
22
22
23
25
25
26
27
30
31