Download Hardware Manual

7.5.5. Digital Output 1 and 2 (Pin 6 and 7)
7.5.5.1 Specification
Outputs 1 and 2 are used for switching the valve. When the valve is not used the
outputs may be free configured and utilized by the user.
DigOUT1
Pin [6]
DigOUT2
Pin [7]
AGND
Pin [12]
Circuit
Open Collector (internal pull-up resistor 2k2 and
diode to +5 VDC)
Switching delay
<3 µs
Figure 7 – Digital output 1 and 2
7.5.5.2 Wiring Examples
DigOUT “Drain”
Maximum input voltage
+36 VDC
Maximum load current
50 mA
Maximum voltage drop
<1.0 V @ 50 mA
neMESYS Manual – Electrical Interfaces
39