Download INSTRUCTION MANUAL
Transcript
❏ 3. Mount the left wing the same way. ❏ 4. Mount the top of each wing strut to the wing with a M2.5x8 machine-thread screw. ❏ 2. Guide the wires from the right wing into the fuselage, then slide the wing joiner tube and the flap pushrod wire through the corresponding holes. Also guide the flap pushrod wire into the screw-lock connector on the flap servo. Guide the joiner tube through the hole in the left side of the fuselage, then tightly “CLICK!” the wing onto the wing clips. ❏ 5. Mount the bottom of each strut to the fuselage over the float strut (or over the main landing gear) with a M3x16 screw. 10