Download ProPresenter 5 User Guide

ProPresenter 5 User Manual
!
Acer you have opened the Matrox GXM Control Panel, click on Matrox Power Desk in the toolbar and select Open Matrox GXM Control Panel. You will see the window shown below.
The lec side of the screen allows you to choose the display sesngs you need to use. Make those selecMons then click on the right arrow to add the resoluMon to the Ac/ve Resolu/ons and Refresh Rates list. If your resoluMon is already listed, you don’t need to make any changes. When you are done, click Apply Changes.
Refer to the Configuring your computer for first use secMon for instrucMons on selecMng the resoluMon for your secondary display. You should have a high resoluMon that matches what you selected in the Matrox Control Panel. If you selected 3 * 800x600 60 Hz in the Matrox sesngs, you should have a resoluMon opMon of 2400 x 600 60 Hz in the system display sesngs.
You will know you have properly configured your displays when you see the default desktop image spanning all three displays. If you do not see this, try restarMng your computer and then going through the steps again.
For a full list of supported resoluMons, refer to this page on Matrox.com.
© 2005-2013 Renewed Vision, Inc.
Page 143 of 158