Download User Manual - Parallels Plesk Panel

3-3.2 Ports Description
The section describes to configure the Port’s alias or any descriptions for the Port Identity. It
provides user to write down an alphanumeric string describing the full name and version
identification for the system’s hardware type, software version, and networking application
Web Interface
To configure an Port Description in the web interface:
1. Click Configuration, Port, then Port Description
2. Specify the detail Port alias or description an alphanumeric string describing the full name
and version identification for the system’s hardware type, software version, and
networking application.
3. Click Apply.
Figure 3-3.1:
The Port Configuration
Parameter description:

Port :
This is the logical port number for this row.

Description :
Enter up to 47 characters to be descriptive name for identifies this port.

Buttons
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
User Manual rev. 1.2. Aug. 2015
31