Download "user manual"

Presentation,
references
Ethernet network
Wiring system
ConneXium hub and transceiver
ConneXium hub
Presentation
Hubs (concentrators) are used for transmitting signals between several media
(ports). Hubs are plug and play devices that do not need to be configured by the
user.
1
The use of hubs makes it possible to create the following topologies:
b Star topology
b Tree topology
2
Hub
DTE
DTE
Hub
Hub
DTE
3
DTE
DTE
Star topology
Hub
DTE
Tree topology
Reference
Description
Interfaces
ConneXium hub
4
4 x 10BASE-T ports (copper
cable), RJ45 shielded
connectors
Reference
Weight
kg
499 NEH 104 10
0.530
499 NEH 104 10
5
ConneXium transceiver
Presentation
ConneXium transceivers are used to:
b Create fibre optic linear bus topologies, for devices with a twisted pair cable
Ethernet connection
b Interface devices with a twisted pair cable Ethernet connection with a fibre optic
cable
6
Transceivers are plug and play devices that do not need to be configured by the
user.
ConneXium transceivers provide fibre optic connections for transmission in areas
subject to interference (high levels of electromagnetic interference) and for long
distance communications.
7
DTE
8
DTE
DTE
Linear topology on optical fibre
Reference
Description
9
10
ConneXium transceiver
499 NTR 101 00
Selection guide:
Pages 5/50 ...
5/68
Interfaces
b 1 x 10BASE-T port
(copper cable), RJ45 shielded
connector
b 1 x 100BASE-FX port
(multimode optical fibre),
SC connector
Reference
499 NTR 101 00
Weight
kg
0.230