Download ERRATIC Mobile Robot User Manual

Transcript
ERA ROBOT USER’S MANUAL
2009 VIDERE DESIGN
Appendix E Erratic controller packet communications .....................34
E.1 Communication channel ................................................................34
E.2 Special byte definitions .................................................................34
E.3 Packet protocol ..............................................................................34
E.4 Checksum calculation ....................................................................34
E.5 Command packets .........................................................................34
E.6 Controller command reference ......................................................35
E.7 Motor info packets .........................................................................36
E.8 Configuration packet .....................................................................37
E.9 Encoder packet ..............................................................................37
E.10 Analog packet ..............................................................................37
E.11 Sonar packet ................................................................................38
Figures and Tables
Appendix F
Power Port .........................................................................39
Figure 2-8 Hokuyo URG mounted on a tilt unit. .......................................... 9
Appendix G
Erratic base dimensions ...................................................40
Figure 2-9 STOC stereo device mounted on a pan-tilt unit. ...................... 10
Figure 2-1 Components for the Erratic robot. .............................................. 6
Figure 2-2 Top of the robot. ......................................................................... 6
Figure 2-3 Port side of the PC. ..................................................................... 7
Figure 2-4 Ports, LED, and power button on top of the robot. .................... 7
Figure 2-5 Inserting the first battery ............................................................ 8
Figure 2-6 Three batteries installed in the back of the robot........................ 8
Figure 2-7 On/off switch and charger port on the left side of the robot. ...... 9
Figure 3-1 Typical setup for integration of Erratic. ................................... 12
Figure 3-2 Typical setup for Player server and clients. .............................. 14
Figure 3-3 Javaclient Viewer program. ...................................................... 16
Figure 5-1 Odometry coordinate system. ................................................... 21
Figure 5-2 Sonar placement ....................................................................... 25
3