Download ERRATIC Mobile Robot User Manual
Transcript
ERA ROBOT USER’S MANUAL 2009 VIDERE DESIGN Appendix E Erratic controller packet communications .....................34 E.1 Communication channel ................................................................34 E.2 Special byte definitions .................................................................34 E.3 Packet protocol ..............................................................................34 E.4 Checksum calculation ....................................................................34 E.5 Command packets .........................................................................34 E.6 Controller command reference ......................................................35 E.7 Motor info packets .........................................................................36 E.8 Configuration packet .....................................................................37 E.9 Encoder packet ..............................................................................37 E.10 Analog packet ..............................................................................37 E.11 Sonar packet ................................................................................38 Figures and Tables Appendix F Power Port .........................................................................39 Figure 2-8 Hokuyo URG mounted on a tilt unit. .......................................... 9 Appendix G Erratic base dimensions ...................................................40 Figure 2-9 STOC stereo device mounted on a pan-tilt unit. ...................... 10 Figure 2-1 Components for the Erratic robot. .............................................. 6 Figure 2-2 Top of the robot. ......................................................................... 6 Figure 2-3 Port side of the PC. ..................................................................... 7 Figure 2-4 Ports, LED, and power button on top of the robot. .................... 7 Figure 2-5 Inserting the first battery ............................................................ 8 Figure 2-6 Three batteries installed in the back of the robot........................ 8 Figure 2-7 On/off switch and charger port on the left side of the robot. ...... 9 Figure 3-1 Typical setup for integration of Erratic. ................................... 12 Figure 3-2 Typical setup for Player server and clients. .............................. 14 Figure 3-3 Javaclient Viewer program. ...................................................... 16 Figure 5-1 Odometry coordinate system. ................................................... 21 Figure 5-2 Sonar placement ....................................................................... 25 3