Download CS5 ConferControl User Manual

CS5 ConferControl User Manual
1. INTRODUCTION
The task of computer based controlling program CS5 ConferControl Software is to
control
the Conference system type CS5 produced by AKG Acoustics.
The purpose of this program is to control in a comprehensive manner the conference
system which provides the main functional possibilities listed below:








Design and save, Conference hall with layout, mapping units to seats, creating and
placing icons to control microphones of participants in each operation.
Design and save Conference with related data and parameters (Name, date , place ,
type, participant data, mapping of participant to seat, set participants attributes, plan
topics and votes)
Switching on and off the microphones of the delegate units in each operation mode
while conference is running.
Conducting different types of voting.
Using the chip card for personal identification.
Displaying the current status of the conference system on the screen.
Displaying the conference related data and parameters on the screen (name, date
and time of conference, data of participants, time and duration of speech, type and
result of voting, etc.)
Storing all data and parameters of the held conferences in the database of PC which
may be sent to external peripheries as well (printer, display, etc.).
2. SYSTEM REQUIREMENTS
For running the CS5 ConferControl program is needed a Personal Computer with
Microsoft© Windows© 7 (32/64 bit) operation system. The PC needed for the optimal
running of the program has to have at least the following parameters: Processor
frequency –1600 MHz, 512 MB RAM, 50 MB free space on the hard disk for installing
the program.
The minimum screen resolution required for displaying the controlling program
is1024x768, while the recommended optimal resolution is 1280x1024.The computer has
to have either a free «SERIAL» or a free «USB» port for connection to CS5 system.